Ricoh 920F Operating Instructions Manual page 1239

2. Troubleshooting When Using the Copy Function
Message
"Cannot dup. copy this size." Duplex mode does not
2
"Cannot select Bypass Tray in
current setting."
"Cannot sort this size."
"Max. number of sets is nn."
(A figure is placed at nn.)
"Original with this length
cannot be duplex scanned."
"Size error in Combine
mode."
"You do not have privileges to
use this function."
22
Cause
support the selected paper
size.
The specified function is not
available with the bypass
tray.
The specified paper size is not
available with the Sort
function.
The number of copies
exceeds the maximum copy
quantity.
The specified custom length is
not available for duplex
printing from the ADF (e.g., 2
Sided 2 Sided, 2 Sided
1 Sided, 2 Sided
Combine).
The specified paper size is not
available with the Combine
function.
The use of this function is
restricted to authentified users
only.
Solution
Duplex mode supports the following
paper sizes: A4 , B5 JIS , 8
1 1
, 8 / ×13, 8 / ×11 , 8
2 2
1
, 8 / ×13 , 16K . Select one of
4
these sizes. For details, see "Duplex
Copying", Copy Reference
Select a paper tray other than the
bypass tray.
This message appears when the bypass
tray is selected.
Use copy paper that is not longer than
356 mm (14").
You can change the maximum copy
quantity from [Max. Number of Sets]
under [Copier Features]. For details
about Max. Copy Quantity, see "User
Tools Menu", Copy Reference
Do not place originals that are longer
than 356 mm (14").
This message appears when the bypass
tray is selected.
Use copy paper that is not longer than
356 mm (14").
Contact the administrator.
1
/ ×14
2
1
/ ×14
4
.
.