Basic Procedure When Using Scan To Folder - Ricoh 920F Operating Instructions Manual

2. Sending Scan Files to Folders

Basic Procedure When Using Scan to Folder

This section describes the basic procedure involved in using Scan to Folder.
1. Make sure that no previous settings remain.
If a previous setting remains, press the [Clear Modes] key.
2
2. If the network delivery scanner screen or E-mail screen is displayed, press [
to switch to the Scan to Folder screen.
3. Place originals.
4. If necessary, select the original type.
For details, see "Selecting Original Type".
5. If necessary, specify the scanning density.
For details, see "Adjusting Image Density".
6. Select a destination.
You can specify multiple destinations.
For details, see "Specifying Scan to Folder Destinations".
7. If necessary, press [Options] to specify the resolution and orientation of the originals.
For details, see "Specifying Send Options".
8. Press the [Start] key.
• When scanning from the exposure glass
If you are scanning only one original, press the [ ] key to send the scan file.
58
] key