Ricoh 920F Operating Instructions Manual page 304

• p.111 "System"
Printing a Stored Print file
The following procedure describes how to print a Stored Print file with the PCL 6/5e or PostScript 3 printer
driver. For information about how to print a Stored Print file with the PostScript 3 printer driver, see "Using
PostScript 3", PostScript 3 Supplement.
• Applications with their own drivers, such as PageMaker, do not support this function.
1. Configure the Stored Print in the printer driver's properties.
You can select two ways for Stored Print:
• [Stored Print]
Stores the file in the printer and print it later using the control panel.
• [Store and Print]
Prints the file at once and also stores the file in the printer.
For details about configuring the printer drivers, see the relevant Help files.
2. Click [Details...], and then enter a User ID in the [User ID:] box.
You can also set a password. The same password must be entered when printing or deleting.
You can also set a file name. The file name you set will be displayed on the printer's Job List screen.
3. Start printing from the application's Print dialog box.
The Stored Print job is sent to the printer.
4. On the printer's control panel, press [Prt.Jobs].
5. Select [Stored Print Jobs] using the [ ] or [ ] key, and then press [Job List].
A list of Stored Print files stored in the printer appears.
You can print files also by pressing [User ID].
Printing from the Print Job Screen
3
91