Placing Originals; Originals; Sizes And Weights Of Recommended Originals - Ricoh C280 Manual

2. Placing Originals

This chapter describes the types of originals you can set and explains how to place originals.

Originals

This section describes the types of originals that can be placed, the paper sizes that are automatically
detected, and the missing image area.

Sizes and Weights of Recommended Originals

The following table describes recommended originals:
Original location
Exposure glass Up to 297 × 432 mm (11.7 × 17 inches)
ADF A3
• The maximum number of originals that can be placed in the ADF is about 50 (80 g/m
• If you do not lift the exposure glass cover more than 30° when you place another original, the
machine might not detect the next original size correctly.
Non-compatible originals for the ADF
Placing the following types of originals in the ADF can cause paper misfeeds or result in damage to the
originals. Place these originals on the exposure glass instead.
• Originals other than those specified in page 51 "Sizes and Weights of Recommended Originals"
• Perforated or torn originals
• Curled, folded, or creased originals
• Pasted originals
• Originals with any kind of coating, such as thermal fax paper, art paper, aluminum foil, carbon
paper, or conductive paper.
• Originals with indexes, tags, other projecting parts
• Stapled or clipped original
• Sticky originals such as translucent paper
Original size
1
– A5 , 11 × 17 – 5
--
1
/ × 8 / 40 – 128 g/m
2 2
(10.6 – 34 lb.)
Original weight
2
2
, 20 lb).
51