Replacing Toner - Ricoh 920F Operating Instructions Manual

Hide thumbs Also See for 920F:
Table of Contents
4. Adding Toner
• When removing jammed paper or replacing toner, avoid getting toner (new or used) on your
clothing. If toner comes into contact with your clothing, wash the stained area with cold water. Hot
water will set the toner into the fabric and make removing the stain impossible.
• When removing jammed paper or replacing toner, avoid getting toner (new or used) on your skin.
If toner comes into contact with your skin, wash the affected area thoroughly with soap and water.
• Always add toner when the machine instructs you.
4
• Fault may occur if you use toner other than the recommended type.
• When adding toner, do not turn off the operation switch. If you do, settings will be lost.
• Store the toner bottles in a cool, dry place free from direct sunlight.
• Store the toner bottles on a flat surface.
• Do not repeatedly install and remove toner cartridges. This will result in toner leakage.
• Do not shake the removed toner cartridge. Remaining toner might scatter.
• You can make about 50 copies even after the
toner early to prevent poor copy quality.

Replacing Toner

This section describes how to replace the toner cartridge.
84
Add Toner indicator begins flashing, but replace

Hide quick links:

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 920F and is the answer not in the manual?

This manual is also suitable for:

Ld220fLd220spf920spf

Table of Contents