3. Adding Paper
3
1
To load 8
/
corner pocket on the left.
5.
Press the metal plate down until it clicks, and then square the paper and load it print side
up.
Do not stack paper over the limit mark.
6.
Carefully slide the paper tray fully in.
• When setting small quantities of paper, be careful not to squeeze in the side fence too much. Paper
might not feed in properly if the side fence is too tight against the paper's edge.
72
1
×14
or 8
/
×14
size paper, pull the end fence out of the tray and place it in the
4
2
BRA028S
BRA042S
BRA029S