Regular Sizes; Specifying Original Size When A Paper Tray Is Selected - Ricoh 920F Operating Instructions Manual

Be sure not to place originals or other objects on the top cover. Doing so may cause a malfunction.
1. Limit mark
2. Document guide
• Originals that are 160 mm (6.3 inches) or less along the feed direction, such as A5 or 5
1
8 / , may jam inside the ADF when you make duplex copies.
2
• Thin originals (64 g/m
1
such as 8 / × 14
2
• Straighten curls in the originals before placing them on the ADF.
• To prevent multiple sheets from being fed at once, fan the original before placing it on the ADF.
• Set the original squarely.
• p.18 "Custom sizes"
• p.21 "Custom sizes"
• p.30 "Copying onto Custom Size Paper"

Specifying Original Size When a Paper Tray is Selected

You can select either regular or custom for the size of the original when a paper tray is selected.

Regular sizes

When placing regular size originals on the exposure glass or in the ADF, specify the size of the originals
from the regular sizes shown on the display.
If you do not specify the original size, the machine will make copies on the paper size in the tray selected.
When copy paper size and original size differ, you need to specify the original size as follows:
BRH021S
2
, 17 lb. or less) that are 356 mm (14 inches) or more along the feed direction,
or 8 × 13 , may jam inside the ADF when you make duplex copies.
Placing Originals
1
1
/ ×
2
17