Ricoh 920F Operating Instructions Manual page 201

3. Copier Features
• Special Mode 5
normal text originals (reproducing the background)
The default setting for "Original Type 1 (Text)" is Text Mode 1.
The default setting for "Original Type 2 (Photo)" is Photo Mode 1.
Duplex Mode Priority
You can select the type of Duplex function effective when the machine is turned on, reset, or modes
are cleared.
The default setting is 1 Sided
3
Orientation
You can select the original orientation when using the Combine/Series, or Duplex function.
The default setting is Do not Specify.
Max. Number of Sets
The maximum copy quantity can be set between 1 and 99 using the number keys.
The default setting is 99 sheets.
Original Count Display
You can set to display the count of originals and copying pages on the display when "On" is selected.
The default setting is Off.
Reproduction Ratio
You can select which reduce, enlarge, or input ratio is shown on the display with priority when
"Reduce" or "Enlarge" is selected.
Reduce or Enlarge ratios for setting are as follows:
The default setting for "Ratio 1" is 50% (Metric version) / 65% (Inch version).
The default setting for "Ratio 2" is 71% (Metric version) / 78% (Inch version).
The default setting for "Ratio 3" is 93% (Metric version) / 93% (Inch version).
The default setting for "Ratio 4" is 141% (Metric version) / 129% (Inch version).
The default setting for "Ratio 5" is 200% (Metric version) / 155% (Inch version).
You can set a ratio other than the above.
1. Select [Reproduction Ratio] using [ ] or [ ], and then press the [OK] key.
2. Select the ratio you want change using [ ] or [ ], and then press the [OK] key.
3. Select [User R/E Ratio] using [ ] or [ ], and then press the [OK] key.
4. Enter a ratio using the number keys from "50-200", and then press the [OK] key.
The "Programmed" message appears.
Preset R/E Priority
You can set the ratio with priority when [R/E] is pressed.
64
1 Sided.