Ricoh 920F Operating Instructions Manual page 325

5. Printer Features
Copies
You can specify the number of print sets. This setting is disabled if the number of pages to print has
been specified with the printer driver or another command.
The number of copies can be specified from 1 to 999 by increments of one.
The default setting is "1" copies.
Blank Page Print
You can select whether or not to print blank pages.
The default setting is [On].
Pages that match one of the following conditions are identified as blank.
• There are no images.
• There are images but they are outside the printable area.
• There are only blank characters.
5
Edge Smoothing
Set this to enable Edge Smoothing.
The default setting is [On].
If Toner Saving is set to On, Edge
Smoothing is ignored even if it is set to On.
Toner Saving
Set this to enable Toner Saving.
The default setting is [Off].
Printer Language
Specify the printer language.
The default setting is [Auto].
Sub Paper Size
You can enable the Auto Substitute Paper Size (A4, LT) feature.
The default setting is [Auto].
Page Size
You can select the default paper size.
• The paper size you can select is as follows:
A4, A5 , B5 JIS, C5 Env, C6 Env, DL Env, 8
1 1
10 / , 5
2
The default setting is A4.
112
1 1 1
/ 8 / , 4 / 9 / , 3
2 2 8 2
1 1
/ 14, 8 / 13, 8
2 2
7 1
/ 7 / , 16K, Custom Size
8 2
1 1
/ 11, 8 / 13, 8 13, 7
2 4
1
/
4