Ricoh 920F Operating Instructions Manual page 77

3. Adding Paper
Paper type and weight
*2
Envelope
*1 Press the [ ] key, select [Custom Size], and then enter the paper size using the number keys.
*2 Press the [ ] key, and then select the paper size.
3
• Certain types of paper produce noise when delivered. This noise does not indicate a problem and
print quality is unaffected. (Glossy paper and OHP transparencies can produce noise when
delivered.)
• When using translucent paper or label paper, make sure to select the appropriate paper type. For
details about Paper Type: Bypass Tray, see "System Settings", Network and System Settings Guide
.
• When loading paper in the paper tray and the optional paper tray unit, place the print side face up.
• When loading paper in the bypass tray, place the print side face down.
• When you use the bypass tray, it is recommended to set the paper direction to
• Do not use paper designed for inkjet printers, as these may stick to the fusing unit and cause a misfeed.
• When loading thick paper (91 - 157 g/m
the stack is no higher than the upper limit of the bypass tray. Paper capacity varies depending on the
thickness and condition of the paper.
• When using thick paper (91 - 157 g/m
bypass tray. For details, see "Copying from the Bypass Tray", Copy Reference
• When copying onto adhesive labels, in bypass settings, select [Thick Paper] for the special paper
setting.
• When loading OHP transparencies, select [OHP (Transparency)] as the paper type for the bypass
tray. For details, see "Copying from the Bypass Tray", Copy Reference
• When you load OHP transparencies, check the front and back of the sheets, and place them correctly,
or a misfeed might occur. Use A4
details, see Copy Reference
• When you use OHP transparencies, fan them for each use.
• We recommend you load OHP transparencies and sheets of label paper and translucent paper one
by one. This prevents them becoming jammed inside the machine.
• Also, be sure to remove printed OHP transparencies and sheets of translucent paper one by one as
they are delivered. This prevents them sticking together.
• We recommend that you use a 4000ANSI lumen or brighter overhead projector to project OHP
transparencies.
76
Metric version
Com10 , Monarch , C5 , C6 , DL Env.
2
, 25 - 42 lb.), or adhesive labels, make sure the top of
2
, 25 - 42 lb.), select [Thick Paper] as the paper type for the
1
or 8 / × 11
2
and Printer Reference
Inch version
Up to 10.5 mm (0.4
inches) high
.
size transparencies, and specify their size. For
.
Paper capacity
.
.