Ricoh 920F Operating Instructions Manual page 173

2. Copying
7. Select [Paper Type] using [ ] or [ ], and then press the [OK] key.
2
8. Select [Thick Paper] using [ ] or [ ], and then press the [OK] key.
The "Programmed" message appears.
9. Place the original, and then press the [Start] key.
10. When the copy job is finished, press the [Clear Modes] key to clear the settings.
• Load only as many envelopes on the bypass tray as can be stacked up to 10.5 mm (0.4 inches) high.
Check the envelopes are not damp. Load only as many envelopes as can be held between the paper
guides on the bypass tray.
• When copying on a small-sized envelope, align the flap to the paper guide on the left.
• Check there is no air in the envelopes before loading.
• To get better print quality, it is recommended that you set the right, left, top, and bottom print margin,
to at least 15 mm (0.6 inches) each.
• You cannot print envelopes with the Duplex function.
36
BRH028S