Ricoh 920F Operating Instructions Manual page 264

• Check there is no air in the envelopes before loading.
• To get better print quality, it is recommended that you set the right, left, top, and bottom print margin,
to at least 15 mm (0.6 in.) each.
• You cannot print envelopes with duplex function.
• Load only one size and type of envelope at a time.
• Before loading envelopes, flatten leading edges (the side going into the machine) by pressing a pencil
or ruler across them.
• Before loading envelopes, check they are rectangular in shape.
1. Open the bypass tray, and then insert the envelopes with the side you want to print face
down until the beeper sounds.
2. Press the [User Tools/Counter] key on the control panel.
3. Press the [ ] or [ ] key to select [System Settings], and then press the [OK] key.
BRP010S
BRP005S
Setting Paper on the Bypass Tray
2
51