Table of Contents
Advertisement
Use
→ The anti-tipper is deactivated.
31
9.11.2 Using the tip-assist
For this wheelchair type the tip-assist is integrated into the frame (see fig. 32).
1) At an obstacle, place one foot on the tip-assist and push down.
2) Slightly tip the wheelchair by simultaneously pressing down on the push handles.
32
9.12 Lap belt (seat belt)
CAUTION
Incorrectly adjusted lap belt
Malpositions, illness, falling of the user due to installation/adjustment errors
► Do not modify the settings established by the qualified personnel. In case of problems with the adjustments
(unsatisfactory sitting position) please contact the qualified personnel who fitted the product.
► The lap belt has to fit closely but not too tightly so the user is not injured. It should be possible to slide two fin
gers comfortably between the belt and thigh.
► Have the settings of the belt system checked regularly. Adjustments may be required due to the growth of the
user or because of changes in the course of the disease or different clothing.
The lap belt (seat belt) prevents the user from slipping and supports positioning.
It is installed on the product by qualified personnel if needed and adapted to the requirements of the user.
Information about subsequent acquisition and mounting is provided by the qualified personnel that handed over the
product.
Using the lap belt
1) Open the buckle.
2) Place the user in an upright, 90° seated position (if physiologically possible). Ensure that the back is up against
the back support pad (if physiologically possible).
3) Close the buckle.
26
Centro S1
Advertisement
Table of Contents
