Table of Contents
Advertisement
73
9.12 Pommel
Removing and attaching the pommel
1) Loosen the thumb screw on the holder of the pommel (see fig. 40, item 1).
2) Remove the pommel.
3) Position the pommel under the seat.
4) Tighten the thumb screw.
9.13 Lap belt (seat belt)
WARNING
Using the belt system or positioning aid as a passenger restraint system in vehicles for transporting per
sons with reduced mobility is prohibited
Serious injuries due to improper handling of the product
► Under no circumstances may the belts and positioning aids that come with the product be used as part of a
passenger restraint system in vehicles for transporting persons with reduced mobility.
► Note that the belts and positioning aids that come with the product are intended only as additional support for
the user sitting in the product.
CAUTION
Incorrectly adjusted lap belt
Malpositions, illness, falling of the user due to installation/adjustment errors
► Do not modify the settings established by the qualified personnel. In case of problems with the adjustments
(unsatisfactory sitting position) please contact the qualified personnel who fitted the product.
► The lap belt has to fit closely but not too tightly so the user is not injured. It should be possible to slide two fin
gers comfortably between the belt and thigh.
► Have the settings of the belt system checked regularly. Adjustments may be required due to the growth of the
user or because of changes in the course of the disease or different clothing.
CAUTION
Improper use
Falls, user falling out due to improper use
► The lap belt must be put on when getting into the product and used at all times while using the product.
► Only open the lap belt when the user is ready to get out of the product.
► Do not leave the user unsupervised if the cognitive abilities of the user could lead to unintentional opening of
the positioning system.
The lap belt (seat belt) prevents the user from slipping and supports positioning.
It is installed on the product by qualified personnel if needed and adapted to the requirements of the user.
Information about subsequent acquisition and mounting is provided by the qualified personnel that handed over the
product.
The following belt is available for the product:
Start Multi
Use
41
Advertisement
Table of Contents
