Seat And Back Upholstery; Removing And Fastening The Seat Cushion - Otto Bock Start M1 Instructions For Use Manual

14
16

6.5 Seat and back upholstery

WARNING
Seat cushion and back padding may ignite
Burns due to user error
► The seat and backrest upholstery as well as padding fulfil the requirements for flame resistance according to
DIN EN 1021-1 and DIN EN 1021-2. However, they may still ignite they fire are handled improperly or negli­
gently.
► Keep away from all ignition sources, especially lit cigarettes.
NOTICE
Wear of the seat and back upholstery
Avoidable loss of functionality due to unallowable continued use
► Have the seat and back upholstery replaced immediately in the event of damage or wear.
The product is equipped with seat and back upholstery. Hook-and-loop fasteners on the seat upholstery are used
to attach the seat cushion. The seat cushion ensures pressure relief during use of the wheelchair.

6.5.1 Removing and fastening the seat cushion

The seat cushion can be removed from the wheelchair for cleaning.
1) Lay the seat cushion onto the seat upholstery and secure it against sliding by pressing it onto the hook-and-
loop fastener (see fig. 17).
2) To remove, detach the seat cushion from the hook-and-loop fastener on the upholstery.
Start M1
15
Use
Ottobock | 15