Adjusting The Angle Of The Elevating Leg Support; Adjusting The Leg Supports; Seat And Back Upholstery; Removing And Fastening The Seat Cushion - Otto Bock Motus CV Instructions For Use Manual

57

9.3.4 Adjusting the angle of the elevating leg support

1) Turn the release lever upwards to the stop (see fig. 59, item 1).
Alternative: The leg support can also be elevated without operating the release lever.
2) Simultaneously move the leg support to the desired angle (see fig. 60, item 2).
3) Twist the release lever back down.
→ The leg support will automatically snap into place in the next free position.
59

9.3.5 Adjusting the leg supports

Further adjustments may be made only by qualified personnel.

9.4 Seat and back upholstery

WARNING
Seat cushions and back support pads may ignite
Burns due to user error
► The seat and back support upholstery as well as seat cushions, padding and covers fulfil the normative
requirements for flame resistance. However, they may still ignite if fire is handled improperly or negligently.
► Keep away from all ignition sources, especially lit cigarettes.
CAUTION
Wear of the seat and back upholstery
Loss of functionality due to prohibited continued use
► Have the seat and back upholstery replaced immediately in case of damage.
The product is equipped with seat and back upholstery. Hook-and-loop fasteners on the seat upholstery are used
to attach the seat cushion. The seat cushion ensures pressure relief during use of the wheelchair. It was chosen by
qualified personnel according to the needs of the user.

9.4.1 Removing and fastening the seat cushion

The seat cushion can be removed for cleaning.
Motus CV, Motus CS
58
60
Use
35