Seat Insert, Small; Delivery Without Padding; Frame Padding; Padding For The Leg Support - Otto Bock Kimba Neo Instructions For Use Manual

Hide thumbs Also See for Kimba Neo:

Table of Contents

6.10 Seat insert, small

The installation is usually carried out by the user's attendant.

For mounting information, see the instructions for use (user).

CAUTION

Missing padding

User injuries due to missing or incorrectly selected pads

► Using the seating unit without padding is not permitted. However, the option "delivery without padding" is

available so you can use individually fabricated padding.

► Note that the producer/distributor is responsible for the user's safety when individually fabricated padding is

used. In particular, the ergonomically correct sitting position of the user without pressure points must be veri

fied. Ottobock assumes no liability in this regard.

► Note that the producer/distributor is also responsible for passing on information on the attachment and care

of the padding.

The option makes it possible to use individual padding if needed.

Note that the Kimba Neo seating unit always has to be delivered and used with padding.

For mounting information, see the instructions for use of the Kimba Neo, Kimba Cross and Kimba Inline outdoor

mobility bases – reference number 647G891.

1) Cut the self-adhesive hook-and-loop straps (see fig. 69) to the appropriate length and adhere them to the outer

sides of the leg support.

2) Insert the pad in the leg support and press it onto the hook-and-loop straps (see fig. 70).

1) Clean the supporting surface of the leg support.

2) Adhere the self-adhesive anti-slip lining to the supporting surface (see fig. 72).

Kimba Neo

Installing options/accessories

Table of Contents