Strut Assembly Disassembly And Assembly - Mitsubishi 1989-1993 GALANT Service Manual

ACTIVE-ELECTRONIC CONTROL SUSPENSION
ELECTRONIC CONTl
Vehicle-height switch
Disassembly steps
l
+ 2. O-ring
3. Actuator bracket mounting nut
4. Actuator bracket
l * l *
5. Strut insulator mounting nut
6. Strut insulator
8. Upper spring pad
l
* 9. Coil spring
11. Strut assembly
(2) First insert the air tube until resistance is felt, and then
push the tube in until the painted place on the air tube.
Caution
Air leakage may occur if the air tube connection is not
complete and secure.
(3) In order to prevent double-folding of the air spring di-
aphragm after reconnection of the air tube, the vehicle-
height switch should be pressed (with the vehicle lifted)
two seconds or more so as to supply air to the air spring.
NOTE
By using the switch as described above, air should be
introduced to the rear air springs and front air springs, in
that sequence, for five seconds each.
1 0 '
11
I