Mitsubishi 1989-1993 GALANT Service Manual page 1108

REAR SUSPENSION <AWD>
TSB Revision
16. REMOVAL OF REAR SUSPENSION ASSEMBLY
mission jack, move it toward the rear (in the direction of
the fuel tank).
(2) Graduallyibwer the transmission jack, avoiding contact
with the stabilizer bar and the propeller shaft.
Caution
1. Ensure that the propeller shaft does not bend
greatly.
2. Ensure that the liibro joint does not receive any
shock.
NOTE
The lowering of the rear suspension assembly from the
transmission jack requires three individuals due to the
amount of weight being handled (one on the differen-
tial, and one on either side of the lower arm).
(3) In order to protect the rear suspension assembly dust
shield, support the lower arm ball joint with a wooden
block.
INSPECTION
Check crossmember for cracks or other damage.
l
SERVICE POINTS OF INSTALLATION
8. INSTALLATION OF PROPELLER SHAFT INSTALLATION
BOLT AND NUT
Install the propeller shaft to the differential carrier, ensuring
that the mating marks are aligned.
3. INSTALLATION OF PARKING BRAKE CABLE END
NOTE
Connecting a parking brake cable end to parking brake lever
and prying up the parking brake lever, the installation of the
other cable end will be easy.