4. Installation of the Components
4.7 Inserting and removing memory cards and the dummy memory
card
4.7.1 Inserting and removing memory cards
CAUTION
Be sure to remove the memory card before moving the main device. Excessive
stress applied on the memory card during transfer might damage the connector
part of the memory card slot.
(1) Installing
Hold the memory card with the cut-off corner on the right. Insert it into the device until you
hear a click, and then release your finger slowly.
Figure 4-33 Inserting the memory card
(1) Memory card
(2) Memory card slot
CAUTION
When inserting the memory card, do not push it too strongly or too quickly.
Otherwise, the connector part of the memory card slot might be damaged.
NOTE
Insert a memory card after removing a dummy memory card if it is inserted.
NOTE
To avoid deleting and writing data, slide the protection switch to Lock.
NOTE
Clean the memory card slot with a dry cloth if it is dusty.
162