7. Device Management
system memory-soft-error
Configures the Switch to output a log message when a soft error occurs in memory inside the
switch processor.
Syntax
To set information:
system memory-soft-error log
To delete information:
no system memory-soft-error log
Input mode
(config)
Parameters
log
Outputs a log message when a soft error occurs in memory inside the switch processor.
1.
Default value when this parameter is omitted:
This parameter cannot be omitted.
Default behavior
A log message is not output when a soft error occurs in memory inside the switch processor.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None
Related commands
None
98