1.3 Power supply unit (PS)
NOTE
1.3.1 PS-A11
The PS-D11 power supply unit is common to AX6300S series switches.
This power supply unit supports 100 V AC and 200 V AC.
(1) External appearance
Figure 1-14 External appearance
(1) ALARM LED
(2) POWER LED
(3) Cable clamp
(4) Installation screw
(5) Terminal for measuring voltage
(6) Bracket preventing disconnection of the power cable
(7) Power supply connector
(8) Power switch
(9) Handles
Power supply units come in an AC model and a DC model.
Do not install both an AC power supply unit and DC power supply unit
on a single Switch.
If you install both units, they will not operate properly.
A power supply unit has a terminal for measuring voltage. This
terminal is used for inspection before the unit is shipped from the
factory. Customers must not use this terminal. In addition, do not insert
anything with a narrow tip, such as a pin or paper clip, into the
terminal. Doing so could result in fire or electric shock.
1. Components Overview
13