Starter Motor Assembly - Honda Motorcycle Service Manual

ELECTRIC STARTERISTARTER CLUTCH
Check the commutator for:
Damage or abnormal wear
Discoloration of the commutator bar
Replace the commutator if
it is
damaged or discolored.
Check for and remove any metallic debris from between
commutator bars
Check for continuity between pairs of commutator bars.
Make a continuity check between individual commutator bars
and the armature shaft.
There should be no continuity.
Check the bearings. (For applicable models only.)
If the bearings are loose or noisey, or if they do not turn
smoothly, replace the cover.
ASSEMBLY
Align the case notch with the brush holder pin and install the
holder on the case.
Place the O-ring (seal ring) on the case. (For applicable models
only.)
Date of Issue: March, 1995
0
HONDA MOTOR CO.,LTD.