Honda Motorcycle Service Manual page 127

FUEL SYSTEM
THROTTLE VALVE (Piston valve type)
NOTE
Cable-operated throttle valve type carburetor [throttle
valve is connected to the cable via the link): Refer to the
Model Specific manual for throttle valve removal1
disassemblv.
Install the clip on the jet needle. (Refer to the Model Specific
manual for the standard clip position.)
Install the jet needle into the throttle valve and secure with the
retainer.
Route the throttle cable through the spring and compress the
spring fully.
Attach the throttle cable end to the bottom of the throttle
valve and thread the throttle cable through the slot in the
valve.
The lower the
clip is set in
the grooves,
the richer the
mixture
becomes.
JET
NEEDLE
9
f
CLIP
RETAINER
\
Align the cutout in the throttle valve with the throttle stop
sa.ew on the carburetor body and install the valve on the
carburetor.
NOTE
Be sure that the throttle valve cutaway is toward the air
cleaner housing side as it determines the volume o f air
for fuel mixture.
STARTING ENRICHMENT VALVE (MANUAL)
Install the starting enrichment valve, spring and nut.
CUTAWAY
~~
~
T H R O ~ T L E STOP SCREW
Date of Issue : March, 1995
o
HONDA MOTOR CO.,LTD.
8-1 7