Spark Arrester; Nuts, Bolts, Fasteners - Honda Motorcycle Service Manual

SPARK ARRESTER (USA only)
i n severe burns.
Perform this operation i n a well-ventilated area free from
combustible materials.
Remove the muffler lid. Block the end of the muffler with a
shop towel.
MUFFLER LID
\
Be sure that the muffler lid bolts and gasket are in good condi-
tion. Replace the bolts and gasket if necessary.
Install the muffler lid and gasket and tighten the bolts securely.
baffle in the end of the spark arresterlmuffler.
The t w o mounting screws must be installed in the spark
arrester body at all times for the spark arrester t o be
NUTS, BOLTS, FASTENERS
Check thal all chassis nuts, bolts and screws are tightened to
their correct torque values at the intervals shown in the
Maintenance Schedule.
Check all cotter pins, slip pins, hose clamps and cable stays.
ARRESTER
BOLTS
Date of Issue: March.1995
2-40
o
HONDA MOTOR CO.,LTD.