Mechanical Drum Brakes Assembly - Honda Motorcycle Service Manual

- brake arm
- wear indicator plate
- felt sealldust seal
- brake cam
ASSEMBLY
BRAKE ARM
I
Remove the following from the brake panel.
Apply a small amount of grease t o the brake cam and anchor
pin.
WEAR INDICATOR PLATE
\
Install the brake cam in the brake panel.
Keep grease off the brake linings.
Wipe excess grease off the cam and anchor pin,
Felt seal: Apply a small amount of engine oil to the felt and in-
stall the felt seal on the brake panel.
Dust seal: Apply a small amount of grease to the dust seal lip
and install.
Install the wear indicator plate by aligning its large serration
with the large serration of the brake cam.
1
WEAR INDICATOR PLATE
I
FELT SEALIDUST SEAL
FELT SEALIDUST
BRAKE ARM BOLT
Install the brake arm on the brake cam while aligning the punch
marks.
Tighten the arm bolt and nut t o the specified torque.