CLUTCH
SET RING
DRIVE GEAR
Install the primary drive gear onto the clutch assembly and
compress the clutch springs using the clutch spring com-
pressor, then remove the set ring.
m
CLUTCH SPRING COMPRESSOR 07960-01 10000
Loosen and remove the tool, then disassemble the clutch.
m
CLUTCH SPRING COMPRESSOR
ARY
Lifter Plate Bearing (Type A. B. C, and D)
The lifter plate bearing inner race is loaded by the lifter rod
when the clutch is disengaged. Inner bearing race damage ef-
fects the clutch operation.
CLUTCH INSPECTION
Turn the bearing inner race with your finger, and check that
the bearing turns smoothly and quietly without play.
Also check that the outer race fits tightly in the lifter plate.
LIFTER PLATE
I
Clutch Outer ITypes A, B, C and
D)
Check the primary driven gear teeth for wear or damage,
replace as necessary.
Check the slots of the clutch outer for nicks. damaae or
-
wear from the clutch discs; replace as necessary.
Check the needle bearing for damage or exessive wear:
replace if necessary.
CLUTCH OUTER
Clutch Outer Guide, Needle Bearing (Types A, B and C)
Measure the I.D. and/or O.D. of the clutch outer guide.
Replace i f the service limits are exceeded.
I
NEEDLE BEARING
CLUTCH
OUTER
GUIDE
Date of Issue: Sep., 1988
@ HONDA MOTOR CO., LTD.