FINAL DRIVEIOUTPUT SHAFT
Hold the drive shaft upright to avoid spilling the oil
Carefully position the gear case on the shaft
CAUTION
Avoid damaging the damper case oil seal during
assembly.
Without Damper Case:
Install a new oil seal, stop ring and spring, then
shaft on the final drive assemblv.
install the
Check that the universal joint moves smoothly without binding
or noise.
UNIVERSAL JOINT INSPECTION
Check the splines for wear or damage and replace the joint if
necessary.
UNIVERSAL JOINT
Install the universal joint on the output shaft, then install the
swingarm.
BEARINGS
A
v
SPLINES
Date of Issue: March, 1995
0
HONDA MOTOR CO.,LTD