Crankcaseicrankshaft - Honda Motorcycle Service Manual

CRANKCASEICRANKSHAFT
Two-Piece Type:
Wipe all oil from the bearing inserts and journals
Reinstall the upper crankcase's main bearing inserts, then
carefully lower the crankshaft in place.
Put a piece of plastiguage on each journal
NOTE
Do not rotate the crankshaft durina the insoection.
PLASTIGAUGE
Install the main bearing inserts on the correct journals in the
lower crankcase, then assemble and tighten the bolts evenly i n
2 or 3 steps t o the specified torque.
One-piece Type
Remove the lower crankcase and measure the compressed
plastigauge on each journal.
If the clearance is beyond the service limit, select the correct
replacement bearings.
14-4
Date of Issue: Nov., 1989
0
HONDA MOTOR CO., LTD.
-