Honda Motorcycle Service Manual page 188

CLUTCH
I
Coat the push rod with grease and install
it
i n the mainshaft.
lnstall the lifter rod.
Untie the clutch lever from the handlebar.
Install the bearing onto the lifter plate.
Install the lifter plate and secure
it
with the :
[Type D1
lnstall the clutch springs on the clutch outer.
jet ring
LIFTER PLATE
Assemble the drive plate i n the clutch outer.
DRIVE PLATE
Install the clutch disc, clutch plate and primary drive gear.
Compress the clutch springs with the clutch spring com-
pressor, then install the set spring i n the groove of the clutch
outer.
Remove the tool.
CLUTCH SPRING COMPRESSOR
07960-01 10000
, ,
. .
,
. . . . . . .
SET R ~ N G DRIVE GEAR
Date of Issue: Sep., 1988
1 1-24
@ HoNDA MOTOR CO., LTD.