Honda Motorcycle Service Manual page 295

BRAKES
NOTE
lnstall the brake shoes according to the position mark on
each brake shoe.
Keep grease off the brake linings.
If the brake drum and linings are contaminated with grease,
clean the brake drum with brake cleaner and replace both
brake shoes.
Coil spring type:
lnstall the shoe springs on the brake shoes,
NOTE
install the shoe springs with end side facing out.
lnstall a brake shoe on the brake panel, then instali the other
shoe being careful to keep the shoe springs in position.
-
SHOE SPRINGS SIDE
BRAKE SHOES
1
/
SHOF SPRING
U-spring type:
lnstall the brake shoes on the brake panel and expand the
shoes by moving the brake arm.
BRAKE SHOE:
lnstall the shoe spring on the brake shoes and secure it on the
anchor pin.
lnstall the wheel.
I
lnstall the brake panel on the wheel hub.
Front wheel: Check the Model Specific manual for the proper
installation procedures.
SPEEDOMETER DRIVE GEAR
I
Date of Issue: March, 1995
0
HONDA MOTOR CO..LTD