MAINTENANCE
If adjust the brake pedal t o the higher position, never enter
the lower end of the push rod thread into the brake pedal
lower joint, as shown.
Check for brake light switch operation after adjustment.
If adjust the brake pedal to the higher position, make sure
that the lower end of the push rod pin contact the brake
pedal lower joint, as shown.
Check for brake light switch operation after adjustment
Drum brake type:
Loosen the lock nut, and turn the pedal adjuster bolt until
the correct pedal height is obtained
Check for free play and brake light switch operation aftel
adjustment.
When free play adjustmt
never enter the end of the brake
rod thread into the adjuster nut, as shown.
ADJUSTER NUT
\
I
Date of Issue: March. 1995
2- 34
0
HONDA MOTOR CO..LTD.