Case Bearing Replacement - Honda Motorcycle Service Manual

FINAL DRlVElOUTPUT SHAFT
CASE BEARING REPLACEMENT
Heat the gear case evenly to 80C(176"F) using a heat gun
To remove the bearing, hold the gear cace so that the bearing
is horizontal and tap the bearing out of the case with a plastic
hammer.
Remove the oil seal and discard it.
Oil the new oil seal and drive it into the case.
. .
~~
t
burns. always wear insulated gloves when
handling the heated gear case.
~~~ ~
.
~
~~~~-
1
Drive a new ring gear bearing into the gear case
\
DRIVER
15-18
Date of Issue: March. 1995
(c: HONDA MOTOR CO..LTD.