Honda Motorcycle Service Manual page 178

CLUTCH
Stra~ghten the lock washer tab.
Hold the clutch outer using the clutch outer holder.
Remove the lock nut using the lock nut wrench.
Remove lock washers A and B; discard washer B.
NOTE
-
Replace lock washer B whenever it is removed.
Remove the clutch assembly from the crankshaft.
Remove the snap ring and primary driven gear from the
mainshaft.
Remove the clutch center guide and collar from the
crankshaft.
Remove the damper springs from the clutch outer.
SNAP
R ~ N G
CLUTCH CENTER GUIDE
Date of Issue: Sep., 1988
11-14
O
HONDA MOTOR CO., LTD.