Tire Storage - Honda Motorcycle Service Manual

WHEELSITIRES
Tubeless Tire
with enough explosive force to cause serious ln~ury or
Tubeless tires have "TUBELESS" stamped on the sidewalls.
Tubeless tire rims have "TUBELESS TlRE APPLICABLE"
stamped on them. Each rim valve has "Snap-in valve: TR
412" (or TR413) on
it.
The rim, bead seating areas, and rim valves are different from
tube-types in construction
Be careful to protect the sealing surfaces when handling and
storing tubeless tires and rims
1
SNAP-IN VALVE
1 I
Tubeless tire rim
"TUBELESS TIRE
APPLICABLE"
+-i~fampe?
Rim valve
hole 11.5 mm
diameter
Tube tire rim
"TUBELESS TIRE
APPLICABLE"
not stamped
Storage
Store tubeless tires upright with a spaceror thick paper placed
between the beads.
If the bead-to-bead clearance is narrower than the rim width.
it
will be difficult to mount the tire.
Do not stack or lean tires against each other.
To store the a mounted, pressurized tire, adjust the pressure
to 112 of the recommended amount. Be sure that valve cap is
securely installed
changer)
In high heat areas (near a heater, steam pipe, etc.)
Where oil or grease is stored
In direct sunlight
In wet or humid areas
Do not store tubeless tires or rims in these areas:
Where ozone is produced (near a motor or battery
WRONG WRONG WRONG
Date of Issue: March. 1995
16-12
0
HONDA MOTOR CO.,LTD.