Frame/Body Panels Inspection; Sub Frames - Honda Motorcycle Service Manual

FRAME/BODY PANELS
SUB FRAMES
s
The sub frame can be removed to improve the service access
on some models. This frame is mainly used on sport type
motorcycles.
INSPECTION
Visually check the frame for damage or bent tubes and
components.
Straighten the hadleber and check the alignment between the
front and rear wheels.
If the rear wheel does not align with the front, check that the
drive chain adjusters are adjusted correctly.
If the rear wheel leans to either side when viewed from above,
check whether the right or left arm is twisted or bent.
Take a horizental view of arm section of the swingarm. Check
the alignment of the rear shock mounts (on dual shock mode-
Is) in the same way.
Apply penetrant to inspect the cracks
NOTE
Refer t o penetrant manufacture's instruction manual for
the proper product use and inspection procedures.
If cracks appear in the paint on the frame, inspect the areals)
more closely to find out if the frame material itself is cracked.
sue
FRAME
Wheel alignment
( 4
View from front
view frbm rear
CHECK FOR:
\
\
CRACKS CRACKS
20-4
Date of Issue : March, 1995
0
HONDA MOTOR CO.,LTD.