Honda Motorcycle Service Manual page 340

ELECTRICAL FUNDAMENTALS
W Check that the wire harness is securely clamped at all
W Route wire harnesses to avoid sharp edges, corners or the
locations.
projected ends of bolts and screws.
GOOD NO GOOD GOOD
GOOD
0
X
J!szL
X
NO GOOD
W To unlock a wire harness or hose from a clip, use a
screwdriver t o open up the tab. When locking the clip.
Seat grommets in their holes properly.
press firmly until it clicks.
If
the clip was removed from the
frame, replace it with a new one. GOOD NO GOOD
"
U
+
e .
DRIVER
Do not bend or twist wire harnesses.
U
Check that the wire harness does not interfere with any
moving or sliding parts after clamping.
GOOD NO GOOD
0
x
NO GOOD
X
Before using testers, read the instructions.
CAUTION
Do not drop parts containing semiconductors. Semicon-
ductors are fragile and sensitive t o shock. Dropping a
semiconductor could damage or destroy
it.
Date of Issue: March,
1995
21-4
o
HONDA MOTOR CO.,LTD.