Water Pump Replacement - Honda Motorcycle Service Manual

COOLING SYSTEM
REPLACEMENT
Drain the engine oil and coolant.
Remove the water pump mounting bolts.
Disconnect the water hoses and by-pass tube, then remove
the water pump.
1
BY-PASS TUBE
HOSES BOLTS
Remove the bolts and separate the pump cover from the body.
Replace the water pump with a new one
Install a new O-ring into the groove in the pump cover, then in-
stall the cover on the pump.
1
O-RING
WATER PUMP
Install a new O-ring onto the water pump, and oil the O-ring
Align the water pump shaft groove with the water pump drive
shaft and install the water pump.
Tighten the pump mounting bolts.
Connect the water hoses and secure the bands and clamp.
Fill the cooling system with coolant and add the recommen-
ded engine oil t o the engine (see naintenance section).
PUMP COVER
BY-PAS:
Date of Issue: March,
1995
0
HONDA MOTOR CO.,LTD