Clutch Outer Inspection; Clutch Shoe Inspection; Driven Pulley Spring Inspection; Driven Pulley Inspection - Honda Motorcycle Service Manual

V-MATIC BELT DRIVE SYSTEM
INSPECTION
Clutch Outer
Measure the I.D. at the shoe contact surface of the clutch
outer.
Replace the outer if the service limit is exceeded.
Clutch Shoe
Measure the thickness of each shoe; replace if the service limit
is exceeded.
Refer to page 12-12 for clutch shoe replacement.
~~~~~~~
.....
u
Driven Pulley Spring
Measure the free length of the driven pulley spring and replace
if the service limit is exceeded.
\
CLUTCH OUTER
Driven Pulley
Check the following:
Both faces for damage or excessive wear.
Guide pin groove for damage or deformation
Replace damaged or worn parts as necessary.
Measure the O.D. of the driven face and the I.D. of the
movable driven face. Replace either part if the service limit is
exceeded.
DRIVEN PULLEY FACE
i
I
/
GLIDE
PIN
MOVABLE FACE GROOVE
Date of Issue Nov
, 1989
0
HONOA MOTOR
CO ,
LTD