Clutch Disc; Lutch Plate; Lutch Center; Lifter Push Rod - Honda Motorcycle Service Manual

CLUTCH
Clutch Disc (Types A,
B,
C and Dl
Check the clutch discs for scoring or discoloration; replace
as necessary.
Measure the disc thickness and replace the discs if the ser-
vice limit is exceeded.
NOTE
/
.
Reolace the clutch discs and dates as a set.
1
1
oisc
Clutch plate (Types A, B. C and D l
.
Check the clutch plates for warpage or discoloration;
replace if necessary.
.
Check for plate warpage on a surface plate using a feeler
gauge; replace if the service limit is exceeded.
NOTE
.
Warped clutch plates prevent the clutch from disengag-
ing properly.
CLUTCH
r " '
FEELER GAUGE PLATE
Clutch Center
Check the clutch center for nicks, grooves or abnormal wear
from the clutch plates; replace as necessary.
NOTE
1.
A damaged clutch center causes engine noise.
Lifter Push Rod (Types
B
and C)
Check the push rod for trueness or damage; replace if
necessary.
If there is a steel ball between the lifter rod and push rod.
check the ball for wear or damage; replace as necessary.
Date of Issue: Sep., 1988
O HONDA MOTOR CO., LTD.