Starter Clutch Assembly - Honda V65 Magna-VF1100C 1983 Shop Manual

CLUTCH
STARTER CLUTCH ASSEMBLY
Install the primary drive gear onto the crankshaft
while moving the primary driven subgear with a
screwdriver.
Install the thrust washer on the crankshaft.
Install the starter idler gear and shaft.
Install the springs, plungers, and rollers into the
starter clutch.
Install the dowel pin.
Install the starter clutch cover aligning the dowel
pin hole with the dowel pin and tighten the bolts.
TORQUE :
26-30
N·m
(2.6-3.0
kg-m,
19-22
ft-lb)
NOTE
I
Apply a locking agent to the bolt threads.
7-22
SCREWDRIVER
STARTER IDLER GEAR
DOWEL PIN
CLUTCH COVER