Install the lock washer by aligning its tabs with the grooves
SPLINE
W A S H t H
of the spline washer.
Do not forget to install the thrust washer at the end of th
I
mainshaft and countershaft.
1
Install the shift forks in the correct positions according to the
location mark on each fork.
"L" mark: Left side of the crankcase
"C"
mark: Center of the crankcase
"R"
mark: Right side of the crankcase
Align oil hole in the bushing or gear with shaft oil hole
Turn the mainshaft or countershaft to ensure that the gears
turn smoothly after reassembly.
OIL HOLES
ALIGN
I
I
Date of Issue March,
1995
0
HONDA MOTOR CO.,LTD.