Honda Motorcycle Service Manual page 339

ELECTRICAL FUNDAMENTALS
Check for torn protective covers and oversized, loose fit- Secure wires and wire harnesses to the frame with wire
ting, female terminals before installation. bands at the designated locations. Install the bands so that
only the insulated surfaces contact the wires or wire
harnesses.
GOOD
.
NO GOOD
GOOD NO GOOD NO GOOD
Replace damaged wires with new ones.
GOOD NO GOOD
0 DO not squeeze a wlre agalnst a weld or the end of its
clamps.
GOOD NO GOOD
X
0 Connectors with protectors facing up must have a drain F B Check that harnesses cannot come in contact with hot
hole. parts after clamping.
GOOD
NO GOOD
X
Protect wires and harnesses with at least t w o layers of
electrical tape or with electrical harness tubes if they con-
tact a sharp edge or corner.
Date of Issue : March, 1995
0
HONDA MOTOR CO.,LTD