Honda Motorcycle Service Manual page 382

BATTERIESICHARGINGILIGHTING SYSTEM
Insert the flywheel puller into the rotor and remove the rotor.
FLYWHEEL PULLER 07733-0010000 or
ROTOR PULLER
07733-0020001
To remove the rotor, screw in the puller attachment, hold it
securely with a wrench, and then screw in the puller shaft
CAUTION
/
-
Strong hammering o n the puller shaft m a y damage
the rotor.
Always use a holder and a puller t o remove the rotor.
Do not try t o remove the rotor b y hammering directly
on
it.
The crankshaft or other components could be
damaged.
ATTACHMENT
.
.
Remove the woodruff key and put
it
where
it
won't be lost.
Disconnect the alternator connector.
Remove the bolts (or screws) securing the alternator wire to
the cover or engine.
Remove the stator.
Stator bolts are often secured with a locking agent. Use an
impact driver to remove the bolts.
WOODRUFF KEY
I
CRANKSHAFT
STATOR REMOVAL
22-28
Date of Issue: March, 1995
O
HONDA MOTOR CO.,LTD.
STATOR BOLTS