Frame Body - Honda CB160 Shop Manual

4. 5 FRAME BODY
3. Fit the front and rear cushions to the frame body.
The front cushiO!J should be inserted by pushing the
fuel tank from the rear. The nut of the rear brace
should be tightened for securing the cushion. (Refer
to Fig.
4.
35)
4. Fit the fuel lines A and B and the reserve line
and secure them by the clips.
5. Fit the seat and tighten it with the seat mounting
bolt.
4. 5 Frame body
A. Construction of frame body
As the frame supports the engine and contacts the
ground through the front and rear wheels, it is all-
important. In addition, it is an important element in
determining the design. The main function of the
frame is maintaining strength of the body for sup-
porting the er19ine, passengers, and carrier load.
Another function allows for absorbing shocks through
the wheels. Sufficient rigidity is required for steering
performance and lightness weight is desired for run-
ning performance.
Fig.
4.
35 Pushing fuel tank from the rear side
MAIN PIPE
STEERING HEAD PIPE
63