Leica GPS1200 Series Technical Reference Manual page 1381

Example
Seismic Record Format
Field Description
hh.h HDOP, four digits including decimal point, 0.0 to 99.9
vv.v VDOP, four digits including decimal point, 0.0 to 99.9
aaa.aaa Antenna height as sum of instrument height and antenna offset, six digits
including decimal point and minus, -99.99 to 999.99
ss Number of satellites used for solution, two digits, 0 to 12
eee Number of epochs spent on point, three digits, 0 to 999
ii Length of interval between epochs in seconds, two digits, 0, 1, 2, 3, 4, 5, 6, 10,
12, 15, 30, 60
REC Receiver type, six digits, SR299, SR399, SR299E, SR399E, SR9400, SR9500,
SR510, SR520, SR530, GS50, GX1210, GX1220, GX1230, GX1230 GG
RSN Receiver serial number, six digits, 0 - 999999
@GSE14 2.4 2.0 1.1 1.7 2.000 8 7 1SR530 040000
When information for a value field of a seismic record is unavailable, the default value is
written instead. This is 0.0 for the DOP values and the antenna height and 0 for all other
fields.
All fields of a seismic record succeed without a separator. When the value for one field
consists of less than the maximum number of digits, then blanks are written for the missing
digits to keep the length of the field consistent.
Numbers are right aligned, text receiver type is left aligned.
GPS1200 1381