Maximum Load Wiring Length For Operation With Sense Lines; Noise And Impedance Effects; Figure 2-2 Maximum Load Wire Length For 1 V Line Drop - Ametek Sorensen XG Operation Manual

Maximum Load Wiring Length For Operation With Sense Lines

Figure 2-2 Maximum Load Wire Length for 1 V Line Drop

Noise and Impedance Effects

To minimize noise pickup or radiation, use shielded twisted pair wiring
of the shortest possible length for load sense wires. Connect the shield to
the power supply chassis. Where shielding is impossible or impractical,
simply twisting the wires together will offer some noise immunity.
M370430-01 Rev B
WIRE GAUGE (AWG)
LOAD CURRENT (AMPS)
Installation
2
2-9