Query Error List - Ametek Sorensen XG Operation Manual

Error Messages
Table B-3

Query Error List

An error number in the range [-499, -400] indicates that the output
queue control of the instrument has detected a problem with the
message exchange protocol described in IEEE 488.2, chapter 6. The
occurrence of any error in this class causes the query error bit (bit 2) in
the Event Status Register to be set.
Table B-4
B-6
Device-Specific Error List
Error Error Message Description
Code
-365 Time out error
This is a generic device-dependent error.
Query Error List
Error Error Message Description
Code
-400 This is the generic query error for the power supply, used only
when the other types of errors do not apply.
M370430-01 Rev B