Voltage-Controlled Voltage Apg Setup - Ametek Sorensen XG Operation Manual

Analog Programming (APG) and Isolated Analog Programming (ISOL)

Voltage-Controlled Voltage APG Setup

Activating APG Voltage Mode
To activate APG voltage mode using an external voltage source:
1.
2.
3.
4.
Deactivating APG Voltage Mode
To deactivate the APG voltage mode:
1.
2.
3.
4.
4-10
Turn the 9-position mode control to the VAP position or press
the rotary Adjust/Enter control if the mode control is already
at the VAP position.
is displayed on the output voltage display.
Turn the rotary Adjust/Enter control to select
source from non-isolated connector).
Press the rotary Adjust/Enter control to commit the selected
mode. is displayed on the output voltage display.
Once the desired level has been selected, press the rotary
Adjust/Enter control to commit the change.
The display will return to the normal display.
Turn the 9-position mode control to the VAP position or press
the rotary Adjust/Enter control if the mode control is already
at the VAP position.
is displayed on the output voltage display.
Turn the rotary Adjust/Enter control to select
Press the rotary Adjust/Enter control to commit the change.
The display will return to the normal display.
(voltage
.
M370430-01 Rev B