C Alibration - Ametek Sorensen XG Operation Manual

Table A-4 SCPI Commands for Calibration
Function SCPI Command
[:]CALibration[<channel>]:RESTore
Restore
Factory
Calibration
[:]CALibration[<channel>]:DEFault
Restore
Default
Calibration
[:]CALibration[<channel>][:VOLTage] :P
Calibrate OVP
ROTection[:OVER]
protection.
[:]CALibration[<channel>]:OUTPut :VOLT
Enter Output
age
Voltage Data
[:]CALibration[<channel>]:OUTPut :CURR
Enter Output
ent
Current Data
[:]CALibration[<channel>]:MONitor
Calibrate the
[:VOLTage]
Voltage
controlled Non
Isolated
Voltage APG
feature
[:]CALibration[<channel>]:MONitor
Calibrate the
[:VOLTage]:ISOLated
Voltage
controlled
Isolated
Voltage APG
feature
Parameter and
Description Range
Restores the calibration to the N/A
factory defaults.
Restores the default N/A
calibration for all variables.
(Unit gain and zero offset).
Calibrate the over voltage <OVP Voltage Set in
protection. Volts>
Sets the voltage output <Voltage set in
calibration level. volts>
Sets the current output <Current set in
calibration level amps>
Calibrate the voltage monitor ? | <NR1> | <nothing
signal system. for interactive mode>
Calibrate the isolated voltage ? | <NR1> | <nothing
monitor signal system. for interactive mode>
Query
N/A
No
No
No
No
Yes
Yes